The RSIC-1-ADM Multi Clip Shoot In is designed for use with Concrete, Steel
or Wood framed ceilings where noise control is required. The RSIC-1-ADM Multi
Clip isolator is a labor saving adjustable mount ceilings. Fasten the clip to
the framing or concrete and and spin the isolator to adjust up and down for
a level ceiling. With an Acoustical design load rating of 36 lbs per isolator,
the RSIC-1-ADM Multi Clip clip can support up to two layers of 5/8" gypsum
board when spaced at 24" x 48" oc., and 3 layers when spaced at 16"
x 48" oc. The RSIC-1-ADM Multi Clip clip attaches directly to the bottom
of the framing or concrete, or to the side of a wood, or steel joist decoupling
the gypsum board from the structure stopping STC and IIC vibrations from entering
the space below.
- Acoustical Design Load: 36 Lbs.
- Total Deflection: 3 mm
- Double Deflection: Yes (1.5mm)
- Recycled Content: Yes
- Low VOC Treated: Yes
- Adjustable: Yes
- Cavity Min: 2-5/8""
- Cavity Max: Up To 12"
- Adjustment Limit: Threaded Rod
- Use On Ceiling: Yes
- Use On Walls: No
- New Construction: Yes
- Retro Fit: Yes